Skip to content

Eco Chambers

ECOCHAMBERS ARE AN ECOLOGICALLY FRIENDLY PRODUCT AND CONTAIN NO LESS THAN 50% RECYCLED HDPE MATERIALS, ENHANCING THE ABILITY TO OBTAIN LEED POINTS.

EcoChamber

Product Features

  • Maximize land utilization with ecoChamber’s underground stormwater storage system
  • Light weight – Two people can quickly and easily install chambers
  • Eco-3052 Chamber’s unique design will accept 24″ HDPE
  • Eco-2036 Chamber’s unique design will accept 15″ HDPE
  • High impact resistant HDPE material
  • Arch design – Proven geometric design for optimal H-20 live loads and deep burial loads.
  • Re-engineering is not required when considering as an alternative to similar chamber products.
  • High storage capacity reduces cost and maximizes land usage.
  • ecoChambers are used for commercial
  • Each Chamber has 5/8″ diameter drain holes along each side to increase lateral flow during extreme storm events.
  • Each Chamber has interlocking connections with adjacent chambers.
  • ecoChambers meet the HDPE material cell classification of 445500 as defined by ASTM D3350 with ASTMF2136 avg stress crack resistance exceeding 24hrs

ECO-2036

  • Size ( W x H x Installed L ): 36″ (914 mm) x 20″ (508 mm ) x76″ (1930mm)
  • Chamber Storage Volume: 21 f 3 (.59m 3)  or 3.31 f3/Lf (.3 m3)/m)
  • Installed Storage*: 36.3 f3 (1.05 m3) or 5.7f3/Lf 9.54m3/m
  • Leaching Port Area: 31.8in2 (205.2cm2)
  • Weight: Approximately 35lbs.
  • Shipping: Up to 700 chambers (>25,500f3
  • * Assumes 6″ (150 mm) of stone below and around chambers and 40% stone porosity

ECO-3052

  • Size ( W x H x Installed L ): 36″ (914 mm) x 20″ (508 mm ) x76″ (1930mm)
  • Chamber Storage Volume: 21 f 3 (.59m 3)  or 3.31 f3/Lf (.3 m3)/m)
  • Installed Storage*: 36.3 f3 (1.05 m3) or 5.7f3/Lf 9.54m3/m
  • Leaching Port Area: 31.8in2 (205.2cm2)
  • Weight: Approximately 35lbs.
  • Shipping: Up to 700 chambers (>25,500f3
  • * Assumes 6″ (150 mm) of stone below and around chambers and 40% stone porosity
Haviland chambers can be easily modeled with the HydroCAD Stormwater Modeling System, allowing simplified calculation of the chamber’s storage and infiltration behavior.  The HydroCAD Chamber Wizard also performs automated chamber system layout, and simplifies the process of designing a chamber system meeting specific storage and footprint requirements.  CLICK HERE for details.

HydroCAD® is a registered trademark of HydroCAD Software Solutions LLC.